CẦN SIẾT CHỈNH LỰC ĐIỆN TỬ HOLEX 655345 135 NM

Giới thiệu CẦN SIẾT CHỈNH LỰC ĐIỆN TỬ HOLEX 655345 135 NM

Description
Version:
Units of measure: N·m, lbf·ft, lbf·in, kgf·m.
Robust torque wrench with impact resistant casing, 2-component handle, large display and
reversible ratchet. Easy operation using large input buttons. Visual and acoustic signal indicates
achievement of the set torque visually and audibly. Two working modes; selectable between
peak value display and following display. The working memory can store up to 50 torque
settings. Sturdy plug-in ratchet with change-over wheel.
Application:
Torque control; controlled tightening of screws in a single operation or for small batch
production.
Standard:
Geprüft nach DIN EN ISO 6789.
Accuracy:
Clockwise ± 2 %, anticlockwise ± 3 %.
Note:
The guaranteed measuring accuracy of the torque is achieved only once the torque range has
been calibrated to DIN EN ISO 6789.
Direction of tightening: For right and left-hand tightening
Torque measuring accuracy: ±2 %
Torque measuring accuracy: ±3 %
Exchangeable tool: Plug-in head
Test certificate: Manufacturer’s test certificate
Calibration: O3
Overall length L: 410 mm
Torque range: 27 - 135 Nm
Resolution: 0.1 Nm
Weight: 1570 g
Adjusted reference dimension on the torque wrench [l2]: 17.5 mm
Square drive: 3/8 inch
Technical description
maximum torque 135 Nm
Resolution 0.1 Nm
Square drive 3/8 inch
Socket for plug-in head 9×12 mm
Weight 1570 g
Torque measuring accuracy ±2 %
Torque measuring accuracy ±3 %
Exchangeable tool Plug-in head
Torque range 27 - 135 Nm
Number of batteries contained 1
Overall length L 410 mm
Reversible reading Nm
Reversible reading lbfft
Reversible reading lbfin
Reversible reading kgfm
Connection format for plug-in heads (rectangular socket)
Lever length without plug-in head [l1] 314.2 mm
Feedback displaying
Trigger principle mechanical short-travel release
Adjusted reference dimension on the torque wrench [l2] 17.5 mm
Adjustable trigger value adjustable
Display digital
Setting the trigger value digital, adjustable
Lever length including factory calibration reference
dimension [l3]
331.7 mm
Standard DIN EN ISO 6789
Measurement process Torque
Calibration O3
Direction of tightening For right and left-hand tightening
Test certificate Manufacturer’s test certificate
Data can be recorded yes
Measurement technology electronic
Release signalling optisk
Release signalling akustisk
Battery type LR3
Power supply Battery-powered
Type of product Torque Wrench

Giá sản phẩm trên Tiki đã bao gồm thuế theo luật hiện hành. Bên cạnh đó, tuỳ vào loại sản phẩm, hình thức và địa chỉ giao hàng mà có thể phát sinh thêm chi phí khác như phí vận chuyển, phụ phí hàng cồng kềnh, thuế nhập khẩu (đối với đơn hàng giao từ nước ngoài có giá trị trên 1 triệu đồng).....

Hình ảnh sản phẩm

Giá HOOK