Version:Power grip with non-allergenic elastomer coating allows transmission of the required torque with no problems even with wet or oily hands.On reaching the set torque value, the screwdriver ca...
Giới thiệu MŨI ĐỤC SẮT ĐẦU DẸP 10MM DÀI 120MM PB SWISS TOOLS 741000 120
Version:
Power grip with non-allergenic elastomer coating allows transmission of the required torque with no problems even with wet or oily hands. On reaching the set torque value, the screwdriver can be felt and heard to trigger and is then again immediately ready for use. The release torque is higher than the tightening torque (overload protection). Torque adjustment without using tools just pull the cap and turn it. The torque setting is displayed in a window (digital display at the end of the handle). Built-in electronics with NFC interface. Battery can be replaced by the customer (button cell CR 1/3 N; 3V).
Units of measure:
Nm, lbfft. To take 6 mm interchangeable blades (No. 659920 − 659928).
Application:
For controlled tightening of screws to a pre-set torque.
Standard:
Tested to DIN EN ISO 6789.
Note:
The guaranteed measuring accuracy of the torque is achieved only once the torque range has been calibrated to DIN EN ISO 6789. -----------
maximum torque
500 cNm
Direction of tightening
Right-hand tightening
Torque measuring accuracy
±6 %
Test certificate
Manufacturer’s test certificate
Calibration
O1
Overall length L
126 mm
Torque range
100 cNm - 500 cNm
Torque range
1 Nm - 5 Nm
Resolution
5 cNm
suitable interchangeable blades
6 mm
Display
digital
Release signalling
akustisk; haptisk
Trigger principle
mechanical slip clutch
Connection format
exchangeable blade
Measurement technology
mechanical
Data can be recorded
no
Setting the trigger value
digital, adjustable
Feedback
triggering
Reversible reading
Nm; lbfft
Measurement process
Torque
Adjustable trigger value
adjustable
Standard
DIN EN ISO 6789
Weight
101 g
Type of product
Torque screwdriver
Giá sản phẩm trên Tiki đã bao gồm thuế theo luật hiện hành. Bên cạnh đó, tuỳ vào loại sản phẩm, hình thức và địa chỉ giao hàng mà có thể phát sinh thêm chi phí khác như phí vận chuyển, phụ phí hàng cồng kềnh, thuế nhập khẩu (đối với đơn hàng giao từ nước ngoài có giá trị trên 1 triệu đồng).....